PTNet Compatible ITC55100B and ITC55300B UNCLAMPED INDUCTIVE SWITCHING TESTERS USERS MANUAL
Document Number: TS0011
Revision 04/14/2009
TS0011ITC55X00BUserManual.pdf
第 1 页
第 2 页
LIMITED WARRANTY
Integrated Technology Corporation warrants its products against defects in materials and workmanship for a period of one year from the date of shipment.
Integrated Technology Corporation will, at its option, repair or replace products, which prove to be defective during the warranty period provided they are returned to Integrated Technology Corporation, and provided proper preventive maintenance and use procedures as listed in the manual were followed. Repairs caused by misuse of the product are not covered by this warranty.
Use of Non-ITC Approved parts or accessories shall void this warranty.
NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. INTEGRATED TECHNOLOGY CORPORATION IS NOT LIABLE FOR CONSEQUENTIAL DAMAGES.
Permission must be obtained directly from factory for warranty repair returns. No liability will be accepted if returned without such permission.
Warranty repair is at the Integrated Technology Corporation selected site and at the Integrated Technology Corporation option.
SOFTWARE DISCLAIMER
This software and the Reference Manual are distributed and licensed ‘as is’ without a guarantee or representation of the correctness, accuracy, reliability, currentness or otherwise. This program is not warranted to meet your requirements or that the operation of the program will be uninterrupted or error free.
The entire risk of results, quality, and performance is assumed by the registered owner of record. If defective, the registered owner of record assumes the entire cost of damages, business interruptions, loss of profits, and loss of information.
Integrated Technology Corporation, dealers, distributors, and agents of this software shall not be responsible or liable for any losses arising from the use, misuse, or inability of this product to perform any given function. Information in the operator’s manual is subject to change with out notice and does not represent a commitment by Integrated Technology Corporation. COPYRIGHT NOTICE
Copyright 1987 - 2007 by Integrated Technology Corporation, Tempe, Arizona. Printed in the United States of America. All rights reserved. Do not reproduce any contents of this publication in whole or in part in any form, by any means without the prior written permission of Integrated Technology Corporation.
TRADEMARKS
PROBILT is a trademark of Integrated Technology Corporation. IBM, PC/AT are registered trademarks of International Business Machines Corporation. EXCEL and Windows NT are registered trademarks of Microsoft Corporation. BLOB is a registered trademark of Volant Systems, Inc.
ELECTROSTATIC DISCHARGE (ESD)
All personnel handling sensitive devices have the responsibility to be aware of the ESD threat to reliability of electronic products. They have prime responsibility to implement and maintain ESD prevention measures. ESD can cause unseen damage to electronic components during the handling and testing of equipment. This could represent lost production, additional manufacturing costs, engineer time, on-site repair, parts replacement, customer dissatisfaction, and the loss of product reputation and future sales.
To ensure against damage due to ESD, always ground oneself through the use of a ground straps or grounded footwear before handling sensitive parts. Patents 5,657,394 and 6,118,894
第 3 页
Revision: 01/06/2009
Contents
| CONTENTS......................................................................................................................................3 |
|---|
| CHAPTER 1 INTRODUCTION.........................................................................................................5 |
| CHAPTER 2 DECLARATION OF CONFORMITY...........................................................................6 |
| CHAPTER 3 READER’S COMMENT SHEET.................................................................................7 |
| CHAPTER 4 PREFACE ...................................................................................................................9 |
| CHAPTER 5 QUICK START..........................................................................................................19 |
| CHAPTER 6 GENERAL INFORMATION ......................................................................................33 |
| CHAPTER 7 SPECIFICATIONS....................................................................................................43 |
| CHAPTER 8 INSTALLATION........................................................................................................49 |
| CHAPTER 9 BASIC TESTER OPERATION .................................................................................59 |
| CHAPTER 10 TEST SPECIFICATIONS........................................................................................69 |
| CHAPTER 11 PACKAGE CONFIGURATION...............................................................................83 |
| CHAPTER 12 TEST MODES.........................................................................................................89 |
| CHAPTER 13 RSF BOX PARAMETERS....................................................................................111 |
| CHAPTER 14 TESTING RESULTS.............................................................................................115 |
| CHAPTER 15 COMMUNICATIONS & SETTINGS......................................................................127 |
| CHAPTER 16 PREVENTIVE MAINTENANCE PROCEDURES .................................................131 |
| GLOSSARY..................................................................................................................................157 |
| APPENDIX A APPLICATION NOTES.........................................................................................162 |
| APPENDIX B GPIB INTERFACES..............................................................................................187 |
| APPENDIX C RECOMMENDED SPARE PARTS.......................................................................226 |
| APPENDIX D CONTROL CABLE CONFIGURATION................................................................227 |
| APPENDIX E FIRMWARE UPDATE PROCEDURES.................................................................229 |
| APPENDIX F AUTO TEST DESCRIPTION.................................................................................242 |
Page 3
Integrated Technology Corporation Proprietary and Confidential Information Copyright © 1997 - 2008 by Integrated Technology Corporation
第 4 页
55X00 User Manual
| APPENDIX G ITC PRODUCT LIST.............................................................................................250 |
|---|
| INDEX & LISTINGS......................................................................................................................250 |
| DOCUMENT CONTROL ..............................................................................................................264 |
Page 4
Integrated Technology Corporation Proprietary and Confidential Information Copyright © 1997 - 2008 by Integrated Technology Corporation
第 5 页
Revision: 01/06/2009
Chapter 1 Introduction
Purpose
This manual provides users with information necessary for operation and care of the test set.
Scope
This manual applies to the ITC55100 and the ITC 55300 testers
Definitions, Acronyms, and Abbreviations
See Glossary
References
None
Overview
None
Integrated Technology Corporation Proprietary and Confidential Information Copyright © 1997 - 2008 by Integrated Technology Corporation
Page 5
第 6 页
55X00 User Manual
Chapter 2 Declaration of Conformity
INTEGRATED TECHNOLOGY CORPORATION
1228 North Stadem Drive Voice: 480-968-3459 Tempe, AZ 85281 USA Fax: 480-968-3099
Integrated Technology Corporation at 1228 North Stadem Drive, Tempe, AZ 85281 USA, declares that the product:
Model ITC55100B & ITC55300B Unclamped Inductive Switching Testers
Complies with the requirements of the following Directives:
Machinery Directives 98/37/EC
Low Voltage Directive 73/23/EEC (modified)
Electromagnetic Compatibility Directive 89/336/EEC (modified)
Conforms to the following Standards:
EN 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use
EN 60204-1 Safety of machinery — Electrical equipment of machines Part 1: General Requirements
EN 50081-2 EMC Generic Emissions, Industrial
EN 50082-2 EMC Generic Immunity, Industrial
EN 292-1 General Principles for Design - Basic Terminology Methodology
EN 292-2 General Principles for Design - Technical Principles and Specifications
Page 6
Integrated Technology Corporation Proprietary and Confidential Information Copyright © 1997 - 2008 by Integrated Technology Corporation
第 7 页
Revision: 01/06/2009
Chapter 3 READER’S COMMENT SHEET
ITC55X00B UNCLAMPED INDUCTIVE SWITCHING TESTERS
After reading this manual and becoming familiar with the operation of the ITC55100B and the ITC55300B Testers, please copy, fill out this form, and then mail it to ITC.
If you find problems in any section of this manual or feel that something is not explained clearly or completely, please let us know so that this manual may be improved to better serve your needs.
If you know of others who have comments, please copy this blank form and ask them to also complete it.
MAILING ADDRESS
INTEGRATED TECHNOLOGY CORPORATION
1228 North Stadem Drive Tempe, Arizona 85281 Phone: 480.968.3459 FAX: 480.968.3099 Attention: Documentation Department
Your Name and Company Address:
Company Name ____________________________________ Company Address ____________________________________ City, State, ZIP ____________________________________ Your Name ____________________________________ Title ____________________________________
Is the information presented in this manual:
| Yes | No | |
|---|---|---|
| Adequate to the subject? | __ | ___ |
| Well organized? | __ | ___ |
| Clearly Presented? | __ | ___ |
| Are you a new ITC55X00B user? | __ | ___ |
Integrated Technology Corporation Proprietary and Confidential Information Copyright © 1997 - 2008 by Integrated Technology Corporation
Page 7
第 8 页
55X00 User Manual
1. Are there sections in this manual that you like or dislike?
2. Do you feel that any topic was not discussed or needed more explanation? ______________________________________________________________________ |
|---|
3. Did you find errors in the manual? ______________________________________________________________________ |
4. What topics would you like to have added to the manual? ______________________________________________________________________ |
5. Would you prefer on-line documentation? ______________________________________________________________________ |
6. Other comments? ______________________________________________________________________ |
| ______________________________________________________________________ Thanks for taking the time to complete this form. |
Your comments are necessary to help us improve this manual.
Page 8
Integrated Technology Corporation Proprietary and Confidential Information Copyright © 1997 - 2008 by Integrated Technology Corporation
第 9 页
Revision: 01/06/2009
Chapter 4 Preface
| CUSTOMER ASSISTANCE ..................................................................................................9 |
|---|
| ABOUT THIS MANUAL .......................................................................................................11 |
| PROPRIETARY NOTICE ....................................................................................................11 |
| MANUAL OVERVIEW .........................................................................................................11 |
| HOW TO READ THIS MANUAL..........................................................................................11 |
| MANUAL REVISIONS .........................................................................................................11 |
| MANUAL CONVENTIONS ..................................................................................................12 |
| USER LICENSE...................................................................................................................13 |
| Agreement Terms ................................................................................................................13 |
| Software Ownership ............................................................................................................13 |
| Copy Restrictions.................................................................................................................13 |
| Site Restrictions...................................................................................................................13 |
| Transfer................................................................................................................................13 |
| Termination..........................................................................................................................14 |
| SAFETY INSTRUCTIONS PART I ......................................................................................15 |
| GENERAL SAFETY RULES I..............................................................................................15 |
| POWER LOCKOUT/TAGOUT INSTRUCTIONS.................................................................15 |
| LOCKOUT/TAGOUT SEQUENCE ......................................................................................16 |
| TESTER INTERLOCKS.......................................................................................................16 |
| SAFETY INSTRUCTIONS PART I ......................................................................................17 |
| GENERAL SAFETY RULES II.............................................................................................17 |
| POWER SOURCE...............................................................................................................17 |
| GROUNDING.......................................................................................................................17 |
| ENVIRONMENTAL..............................................................................................................17 |
| SERVICE .............................................................................................................................17 |
| SAFETY INSTRUCTIONS PART II .....................................................................................18 |
| TYPES OF ELECTRICAL HAZARDS .................................................................................18 |
The Preface should be read before reading the rest of the manual because it contains information on customer assistance, manual layout, and tester safety precautions.
CUSTOMER ASSISTANCE
If you have any difficulties with the ITC55X00B firmware or hardware, please let us know by calling John Service in our Customer Service Department, using our e-mail address, sending a Fax, or by mailing us a description of the problem. When reporting a problem, have available the serial number of your tester, a record of all circumstances and symptoms and if possible the results of the AutoTest template that verifies the problem.
Page 9
Integrated Technology Corporation Proprietary and Confidential Information Copyright © 1997 - 2008 by Integrated Technology Corporation
第 10 页
55X00 User Manual
Voice 480.968.3459 Fax 480.968.3099
e-mail address : CustomerService@IntTechCorp.com
Firmware Updates : http://support.inttechcorp.com (Password required)
Refer to Appendix E for tester and LCD firmware update procedures.
INTEGRATED TECHNOLOGY CORPORATION 1228 NORTH STADEM DRIVE
TEMPE, ARIZONA 85281, USA
Attn. Customer Service
Page 10
Integrated Technology Corporation Proprietary and Confidential Information Copyright © 1997 - 2008 by Integrated Technology Corporation
预览结束 · 共 266 页
下载完整版